16
Member Projects / Re: My first fe build
« on: August 12, 2017, 12:58:29 AM »
I'm going to take it to h.e.b . I hear he has some fe cars also.
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
Member Projects / Re: My first fe build
« on: August 11, 2017, 09:41:50 AM »
I have not taking it in yet . It says standard hoping it will only need just the minimum.
18
Member Projects / Re: Galaxie turbo FE 390 build
« on: August 09, 2017, 05:17:58 PM »
Did you use a adapter plate for the t56 ?
19
Member Projects / My first fe build
« on: August 09, 2017, 12:17:06 PM »
Excited picked up a 390 crank and rods . Going to machine shop here in Houston . STD fe block . Was originally had a 360 crank . Tossed that out .
20
FE Technical Forum / Re: Not my engine but curious
« on: August 06, 2017, 10:33:02 AM »
Thank you guys for the knowledge .
21
FE Technical Forum / Not my engine but curious
« on: August 06, 2017, 02:06:53 AM »
It's not my engine . It's on Facebook . The timing dowel pin broke off and damaged the bottom end ,that is the story I heard on it . Have you guys seen this before ?
22
FE Technical Forum / Re: Kurt Neighbors 64 Farilane
« on: August 05, 2017, 12:03:09 PM »
Any update on engine damage ?
23
FE Technical Forum / Re: C6ME 390 block sonic check
« on: July 31, 2017, 02:21:11 PM »
Sorry to go off topic but I thought this was you jay
25
FE Technical Forum / Re: Kurt Neighbors 64 Farilane
« on: July 18, 2017, 01:35:58 PM »
July issue ?
26
FE Engine Dyno Results / Re: Spirited 390-pump gas/power brake friendly 531hp
« on: May 18, 2017, 08:09:47 PM »
What intake valve did you go with on the heads ? 2.200 or 2.150
27
Drag Strip Results for FE Powered Vehicles / Re: 1967 fastback 485
« on: May 18, 2017, 02:18:54 PM »
Thank you. You racing the new mustang movitated me . I hope the big guys see this post . I know Barry says more cube bring more power down low. You have the 4.250 stroke ?
28
Drag Strip Results for FE Powered Vehicles / Re: 1967 fastback 485
« on: May 17, 2017, 09:21:54 PM »
Stangman , was the gt350 getting on it ? Your fe sounds really good ! I'm trying to put a fe setup una foxbody for drag . What would you recommend ?
29
FE Technical Forum / Re: Shortest deck height on a factory block FE?
« on: May 17, 2017, 09:00:12 PM »
Is 10.3 even shorter ?
30
Private Classifieds / Re: Fresh 390 crossbolt block, Mahle stroker 390/431 pistons, Diamond 428 pistons
« on: December 17, 2016, 11:47:06 AM »
Is there all 8 pistons for the 4.125 stroke ?