1
FE Technical Forum / Re: Best head for a 352 build
« on: March 18, 2016, 04:58:18 PM »
Ive been planning a 352 build for a while, and I'll cast my vote for the C6AE-U GT390 heads.....they have the soft D chamber that's listed at 67.1 to 70.1cc's and the smaller velocity ports that I think 352 needs. C7AE-A GT's would be my next choice.
I'm wondering since you're going with custom pistons whether you're using stock length 6.54 inch or the shorter 6.488 rods? I thought if I went the custom route , I'd have them made for the shorter rod since there are Hi performance rods available and to get a slightly more favorable rod to stroke ratio.
I also think that the Edelbrock Performer intake would be perfect for the 352.
Good luck......M
I'm wondering since you're going with custom pistons whether you're using stock length 6.54 inch or the shorter 6.488 rods? I thought if I went the custom route , I'd have them made for the shorter rod since there are Hi performance rods available and to get a slightly more favorable rod to stroke ratio.
I also think that the Edelbrock Performer intake would be perfect for the 352.
Good luck......M