1
FE Technical Forum / Any one traveling from west coast to east coast
« on: March 29, 2018, 09:08:48 PM »
Need a block picked up in southern California going to N.J. let me know.
Thanks
Thanks
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Vendor Classifieds / engine shipping cost
« on: January 29, 2018, 04:34:00 PM »
What is good price Fl to NJ . Fastenal quoted me $235 Thanks
3
Private Classifieds / crank, rods , and piston worth
« on: December 30, 2017, 11:26:50 PM »
Hey guys I have $teel crank, lemans cap screw rods and TRW forged pistons std bore. Have a local guy interested what be fair asking price? Thanks
4
FE Technical Forum / 67 galaxie - hooker super comp headers
« on: April 01, 2015, 06:25:29 PM »
Anyone running them on a 390 67 Gal. How is fitment, looks like I will have to at least make a half in. dimple in no. 2 tube, it is contacting the pitman arm. Also, looks like they don't use the tabs and allen head bolt any more on the no. 3 tube, just resistance fit (maybe a dab of copper RTV). Passenger side good. I called hooker and the gentlemen I spoke with was clueless. Thanks
5
FE Technical Forum / Is this block worth grabbing??
« on: September 11, 2014, 06:31:15 PM »
Hey guys,
It looks like this block has had some machine work done. It looks like their saying it was casted that way. Never heard of a cross bolted 428 SCJ, not much info on site. Is this something Holman Moody did after market, looks like typical ribbed service block. Your thoughts. Thanks
ebay item # 171450020107
It looks like this block has had some machine work done. It looks like their saying it was casted that way. Never heard of a cross bolted 428 SCJ, not much info on site. Is this something Holman Moody did after market, looks like typical ribbed service block. Your thoughts. Thanks
ebay item # 171450020107
6
FE Technical Forum / Starter for stroker???
« on: January 14, 2014, 11:12:02 AM »
What starter are you guys using on your stroker builds, stock or after market mini's? Thanks
7
FE Technical Forum / windage tray- screened or louvered?
« on: December 02, 2013, 05:49:49 PM »
Hey guys, thoughts on which works best for 445 stroker build. Clearance? Canton? Thanks
Trying to gather the parts for winter build.
Trying to gather the parts for winter build.
8
FE Technical Forum / Freeze Plug preference - steel or brass
« on: November 26, 2013, 04:31:39 PM »
Starting the rebuild on the truck 391 I got a bit ago, so I'm gathering up all the little stuff. Thanks
9
FE Technical Forum / 391 truck block
« on: October 19, 2013, 06:51:51 PM »
I have chance to pick up a 391 truck block D4TE-1 cheap. Any differences from the 390 block? Will Barry R's 445 kit work with those blocks? I know the crank is different, anything else I should look out for? Thanks
10
FE Technical Forum / vac advance or no vac advance
« on: April 01, 2013, 09:58:44 PM »
Hey guys, still getting all the parts together to wake the rebuilt 390 in my Gal. I've been looking at the new Pertronix flame thrower dis. with the ignition III module. Doesn't need a ign box, easy to adjust mechanical advance and has a digital rev limiter, I need your thought getting it with or without vac advance. Mostly street with some strip time, Comp cam 282S, CJ heads, edelbrock streetmaster and 750 holley. With it being mostly a street car, I was thinking with vac advance. THANKS
11
FE Technical Forum / Erson shafts and stands
« on: March 14, 2013, 06:43:34 PM »
Hey guys,
I missed out on the comp roller rockers on ebay, but I just saw a set of Erson shafts and stands on the other fe site. No rockers, just the shims with them. Are there specific erson rockers or will others work with them, like pops,comps,harlands etc? Might be better off staying away from them since they don't make them any more? As for replacement parts. Thanks
I missed out on the comp roller rockers on ebay, but I just saw a set of Erson shafts and stands on the other fe site. No rockers, just the shims with them. Are there specific erson rockers or will others work with them, like pops,comps,harlands etc? Might be better off staying away from them since they don't make them any more? As for replacement parts. Thanks
12
FE Technical Forum / Are these any good? Jay,Ross anyone?
« on: March 11, 2013, 02:02:18 PM »
Hey guys,
Found these on ebay , with my tight budget I thought they may work for me. I don't have any experience with roller rockers, these don't use bushing or bearing and I don't see an oil groove cut in them, so I don't know if there is excessive wear on them. I thought I read a thread here that Jay or Ross run this type of rocker. Thanks again!
http://www.ebay.com/itm/261180983412?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Found these on ebay , with my tight budget I thought they may work for me. I don't have any experience with roller rockers, these don't use bushing or bearing and I don't see an oil groove cut in them, so I don't know if there is excessive wear on them. I thought I read a thread here that Jay or Ross run this type of rocker. Thanks again!
http://www.ebay.com/itm/261180983412?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
13
FE Technical Forum / bushed or bearing rockers?
« on: March 06, 2013, 12:53:03 PM »
Bushed are usually suited for the street-strip and bearing racing applications. I have a chance to get a set that are bearing for cheap, he says they're comp cams. I'm not sure if he is the real deal. Any way, my car is more street-strip, so maybe I don't need bearing rockers.
14
FE Technical Forum / head date codes
« on: February 24, 2013, 11:29:01 PM »
Hey guys, Is it common to find mismatched date codes on cj heads? Maybe this engine has been messed with?
C8OE-6090-N 9F19 and 8L16
C8OE-6090-N 9F19 and 8L16
15
FE Technical Forum / compression ratio
« on: February 19, 2013, 07:52:17 PM »
67 390 stock rebuild .30 over, 9 to 1 ? Are there any calculators out there or would factory specs be close? Thanks
Pages: [1] 2