1
Member Projects / Re: The Bad Byrd Project
« on: December 30, 2013, 01:09:17 PM »
Could you explain where you mount the fan that is on the photos, on a fender ? and for what is the purpose
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
So I made some threaded sleeves with 9/16-12 threads on the O.D. and tapped 3/8-16. The off center holes were plunged thru with a end mill and tapped 9/16-12. Now the holes are back on center!Very nice an professionnal job, but why don't you considered to use Helicoil instead
Awesome Galaxie with with the right engine ! Looks like you are one belt and pump, a few hoses and a big tank short of a dry sump oiling system! I bet everyone stops to listen when you get the RPMs up in that TP!! One suggestion is to completely separate spark plug wires 7 and 8, induction does bad things to cylinder number 8, like how I broke the ring lands on my number 8 piston in my 390 25 years ago Sorry for my french Courtney.You are right for the sparkplug wire, the were reassembled too quickly, I will modify this.