Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mechanik5243

Pages: [1]
1
Non-FE Discussion Forum / Re: New Members - Introduce Yourselves Here!
« on: January 06, 2015, 02:47:46 AM »
Yes it was a realy good feeling to get some, but there are a lot of faster cars on the Track which are for racing only...
But for this year, the cards are reshuffled!

Was fun at all and there faces when thay want to overtake in the corners and the Galaxie still holds his Line is priceless  ;D

The Swaybars are from Quickor Garage, currently they have there kit on ebay for 295$ (very nice price) and i would recommand to install front and rear swaybar!
http://www.ebay.com/itm/59-60-61-62-63-64-Galaxie-1-Front-and-7-8-Rear-Sway-Bar-new-/261724213078?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ceffa8f56&vxp=mtr

You have to know that you musst disassembly one side of your front A-Arms to install the swaybar, and i assume that the 1" fromt swaybar comes in touch with the lower A-Arm without the lower A-Arm Offset Shaft Eliminator Kit.

2
Non-FE Discussion Forum / Re: New Members - Introduce Yourselves Here!
« on: January 04, 2015, 05:36:19 PM »
Yes there are a few things that i have changed:

Lower A-Arm Offset Shaft Eliminator Kit
1" front Swaybar
7/8" rear Swaybar
Bilstein Shocks from Race Car Dynamics
Cal Tracs
shortend 70th Lincoln Coil Springs in the front and four Power Disc Brakes
15" Steel Wheels

Here is one more from the Nürburgring, where you can see well that the tires have to work hard  ;)

3
Non-FE Discussion Forum / Re: New Members - Introduce Yourselves Here!
« on: January 01, 2015, 02:24:42 PM »
Thank you Jay Brown for your Book and this Forum it was a big help for me  8)

I hope everyone can see the picture and its not to big



4
Non-FE Discussion Forum / Re: New Members - Introduce Yourselves Here!
« on: January 01, 2015, 01:27:36 PM »
Hi Guys and Gals ;D

I am registered since May 08, 2012 and i think its time to introduce my self and my 63 Galaxie.
I hope my grammar is not to bad, please be patient with me ::)

My real Name is Heiko Junga and i am from Germany living in a small Town named Merzen, near Osnabrück in lower saxony.
I`m also known as Mechanik5243 or Henk van Tychelän on Forums, Facebook or what ever.

Now the interesting stuff:
I have my 63 1/2 Galaxie since the end of 2006 and its a rolling Restoration.

390FE 4bbl. 0.030 over.
Comp Cams Extreme Energy 262H.
C4AE Cast Iron Heads with Cobra Jet specs from Tuff Dawg Engines (Oil restrictors in Head).
Rocker assembly with Rocker /  Endstands from precision Oil Pumps.
Edelbrock RPM Intake with 600cfm or 750cfm Carburetor (depends on rearend ratio).
Spectre Dual Cold Air Intake.
Sanderson Shorty Headers with X-Pipe and 2,5" pipings and Mc Flowpath Mufflers.
Milodon 8quart T-Oilpan and ARP Oilpump Driveshaft
Stock Distributor with Crane XR-i electric ignition with rev limiter.
It had a C6 Transmission, but currently i`m swapping to an Tremec TKO600RR 5Speed manuel Transmission.
Then i will test the old Cam and a new Cam (Comp Cam Magnum 282S) but i still  need the solid Rocker stuff.
 
Here is a Video from my first race experience on the Nürburgring Grand Prix Race Track
http://www.youtube.com/watch?v=DyL2vnCuDoc

Pages: [1]