FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: hbstang on September 20, 2019, 08:21:08 PM
-
this is a cC6ME PI -A- block with C8OE-N HEADS.short block has forged trw pistons and lemans rods.all balanced.it was used when i got it,but had low miles on it and still does.heads were mild ported,and all new valves,guides etc springs.also they were milled .045 to bump compression,which ended up at approx 10.6.runs great on 91 pump gas.also has performer rpm port matched and milled for heads.cam is comp hyd roller ,230-236 @.050 and .565 lift,with morel lifters.comp cams complete hd roller rockers.comes as shown in pics with deep pan.oil pump is pops and had 50-60 hot oil pressure.carb is 750 double pumper,brand new msd distributor maziere water pump.small temp gage not included.everthing only has a few miles on it.never got it to the track.ran great.asking $6500.no shipping.
69 R code c6 trans.this was completey rebuilt and comes with your choice of 3000 stall 10 inch or 2400 stall 11 inch.worked perfect behinf the 428.stock original valve body,r servo etc.has vin.asking $2500. no shipping
send a pm for contact info and pics.i guess they didnt load.
also have 427 side oiler block and 428 crank for sale.block is .017 over and in nice shape with no sleeves.was a running engine when i got it.asking $3000 for it.
also have a used cvr elelctric water pump for sale for fe. worked good and have spacers.$150 shipped in lower 48 states.
-
bump for more parts
-
interested in the 427. got any pics and location?
email ctzr01@tds.net
-
Yeah, what state are you located in?
-
the parts are in southern cal.92647.
-
the engine is still for sale but trans is sold.