FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: GJCAT427 on January 16, 2019, 05:58:32 PM

Title: Valve keeper angles 7* or 10* Wrong section
Post by: GJCAT427 on January 16, 2019, 05:58:32 PM

On my new TP build I`m thinking which angle keepers and retainers should I use. 3/8ths valves, that came with the heads, correct valve springs for the .600 lift cam, all done except the locks and keepers. Would 7* be too small for this cam and spring pressure?