FE Power Forums
FE Power Forums => Vendor Classifieds => Topic started by: CaptCobrajet on January 16, 2019, 09:16:33 AM
-
I am looking for four cherry C4AE-6090G head castings. Heads need to be uncut from OEM level, and all valve seats need to be in generally good condition. No seat inserts or sunken seats, especially on exhaust. Guide wear is not a problem. All 3/8 threaded holes need to be in good shape. Let me know if you have some good ones that you are willing to part with. Probably a 75% chance we will use them for an Engine Masters effort. captcj at hughes dot net.
Thanks,
Blair Patrick
-
Are the G heads the only ones you want? Might have a pair of H LR heads but they might have exhaust seat inserts.
Richard
-
They would have to be the G castings for the combo. This year's rules mandate using the head that comes on the engine claimed. These would be on a 352 based combo.
-
I have a few sets, including a set on a complete 65 352-4V. Might work OK, as I still have that set of heads that we talked about working on- we can talk
-
Sounds good Gene, give me a call or email. Thanks much.
-
Blair, I had an old 352 sitting around and checked the heads and it has ONE c4ae-6090-G and ONE C8ae-6090-H on it. Go figure! Your welcome to the G and/or the H for that matter if you need it. I am located in Duluth, GA 30097.
Jose
-
Thanks Jose, there are a few guys checking on pairs they have. If they don't pan out, I'll get in touch with you. Appreciate your offer.
-
I appreciate all of you guys who responded. I have ended up with six heads now, which I think will be enough. I'm sure I will ruin one or two.......or three.....on the way to a finished pair. Time will tell.