FE Power Forums
FE Power Forums => Member Projects => Topic started by: dmazz on September 27, 2018, 08:06:40 AM
-
We are planning to swap engines in a 77 F 150 4x4 435 4 speed, the truck currently has a 302, the 390 we want to put in the truck came out of my 66 Fairlane. Are the cross members different from 76 to 77, will we need a different oil pan for a 4x4. All input and suggestions will help, thank you.
-
76 and 77 model years were virtually identical. The crossmembers should be the same. My '76 F-250 has a 390 in it. Great motor for that truck.
-
There should be no crossmember in the mix on a 4x4. You just need the correct frame perches and mounts that come from the frame rails
Yes you will need a 4x4 oil pan and pickup, they are rear sump. A front sump would be directly over the axle
-
Remember that the 1976 FE 4X4 had the angled oil filter adapter and they are kind of hard to find. Not sure if a 77 would have the same issue. I haven't looked to see if the PU adapter or car adapter would fit. I don't have a 1976 4X4 PU to check the fitment.
Richard