FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: scott foxwell on December 08, 2017, 06:53:14 PM
-
Looking for a real FE blower intake. Not a carb intake modded and welded, but a real blower intake. Willing to trade my medium riser 2x4 or some other FE parts I might have and some cash.
TIA
-
https://stlouis.craigslist.org/pts/6358756935.html
Just saw this, know nothing about it. Hope it helps.
Jack
-
https://stlouis.craigslist.org/pts/6358756935.html
Just saw this, know nothing about it. Hope it helps.
Jack
That’s a welded & modified Offy 360 carb intake. Good example of what Scott’s not looking for lol ;D
-
https://stlouis.craigslist.org/pts/6358756935.html
Just saw this, know nothing about it. Hope it helps.
Jack
That’s a welded & modified Offy 360 carb intake. Good example of what Scott’s not looking for lol ;D
Yeah,pretty much. Thanks anyway, Jack. I do appreciate the effort.
-
Damn Im dropping the ball all over it seems. I did something similar on the other fe site yesterday to. Ha. I just saw blower Intake and copied the link. I did see another one on eBay yesterday to.
-
Does/did someone ever make a FE blower intake? It seems all you see is a modified version.
-
Blue thunder made one. I saw one recently new on ebay but looked and it is gone.
-
Holman&Moody also made them, almost bought one but had already started the blown y-block project
can send pics and info if interested, email: dmdb1969@gmail.com
-
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F182964198522
-
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F182964198522
LOL...saw that. Doesn't even have a dist hole. Price is just a little absurd... :o
-
There was a FE one at this fall Columbus swap meet for $750 with a "HB" blow off plate, presumably Hampton Blowers.
-
Saw an ad in the back of this months Fairlaner Magazine. Keith Litteken (314) 480-2556 email kslitteken@aol.com claims to have a complete FE BDS Blower set up and another FE blower intake?? Give him a try...
-
Saw an ad in the back of this months Fairlaner Magazine. Keith Litteken (314) 480-2556 email kslitteken@aol.com claims to have a complete FE BDS Blower set up and another FE blower intake?? Give him a try...
Thanks Tony!! I'll check it out!
-
Unless I'm missing something, I see these http://www.blowerdriveservice.com/store/390428-ford-intake-polished-p-1682.html (http://www.blowerdriveservice.com/store/390428-ford-intake-polished-p-1682.html)
-
That looks to be a converted Offy intake.
-
That looks to be a converted Offy intake.
It is.
-
FWIW I've had a BlueThunder blower manifold on back order from Mustangs Unlimited for about 2 years. I called them around July last year to see if my order was still there and they said was and they'd let me know.
-
https://www.ebay.com/itm/FORD-FE-390-427-Holman-Moody-NOS-Supercharger-Manifold-8V-71-blower-Rarest/182964198522?_trkparms=pageci%3A25e2682b-0cec-11e8-8f9f-74dbd180c567%7Cparentrq%3A7638fe971610a8669d1166b6fffa2d38%7Ciid%3A2&_trksid=p2481888.c100651.m4497
That's a cool deal right there. Not sure if you've found your intake yet or not.
-
Have to use a cam drive dizzy, a distributorless ignition, or machine the dizzy hole and use a spacer. Cool piece but depending on the application, how practical would it be.
Didn't catch it the first time around myself.
-
https://www.ebay.com/itm/FORD-FE-390-427-Holman-Moody-NOS-Supercharger-Manifold-8V-71-blower-Rarest/182964198522?_trkparms=pageci%3A25e2682b-0cec-11e8-8f9f-74dbd180c567%7Cparentrq%3A7638fe971610a8669d1166b6fffa2d38%7Ciid%3A2&_trksid=p2481888.c100651.m4497
That's a cool deal right there. Not sure if you've found your intake yet or not.
Not for 2500.00.
Looks like BT will be making another run of these. I can wait but thanks for taking the time to post this. I appreciate it!
-
In regards to Blower manifolds, Cragar, M/T, HM, and Weiand made them. These are Low/Medium intakes and there is the Magnesium Ford script intake for Hiriser many credit M/T for. In reality that intake shares no features of any M/T blower manifold so I'm a bit sceptical on that "eBay" theory. Mostly being it shares all if the traits of the HM low/medium riser intake including the pop off valve design. If you look the Blue Thunder is a direct copy of the HM manifold less the logo. The pop off pad is there too but it is cast solid so it can be run with various valves or a burst panel.
The reason the HM intake in the eBay ad lacks the distributor hole is because you more often than not used a distributor off set drive timing cover or ran the mag off the front of the cam. HM Cragar and M/T all offered these. While steep, for NOS he's not out of line. A BDS converted Offenhauser 2x4 is $1400 new for FE.
Anyway for anyone in need Dyers has been producing a brand new one piece blower manifold for a few years. Bill Dyer contacted me when they were preproduction in seeing one of my want ads for one. Their intake is a tunnelwedge with a blowerplate instead of carb pads but it is cast that way not modified like the BDS units. For guys interested in running a distributor this allows clearance without a blower spacer.
-
They exist somewhere -
(https://s18.postimg.org/ffdba873d/FE_blower.jpg) (https://postimages.org/)
-
I looked into the Dyers blower setup mentioned above, just to see what product they produce. They're actually using a port-o-sonic intake. They do some milling on the intake and weld in the flange piece.
(https://s18.postimg.org/3x78e1rh5/intake-feford-offy_1.jpg) (https://postimages.org/)
(https://s18.postimg.org/sqgsepi7d/intake-feford-offy_2.jpg) (https://postimages.org/)
(https://s18.postimg.org/6radri92x/intake-feford-offy_3.jpg) (https://postimages.org/)
(https://s18.postimg.org/vkjxs5zt5/intake-feford-offy_4.jpg) (https://postimages.org/)
-
That's a bit rough looking from what was sent and I was told specifically it cast as one piece to get away from doing this. I posted about it on the old forum after talking to Bill. He seemed a little shocked I wasn't interested in it but he missed the " vintage 60's intake " part of the want ad and I'd still like to find the M/T version.
Good luck
-
A cut down edelbrock cross ram would likely make a good piece.