FE Power Forums
FE Power Forums => Non-FE Discussion Forum => Topic started by: machoneman on July 17, 2017, 05:47:44 AM
-
My Stang has a non-folding rear seat. The seat back slips nicely onto the OEM hooks, but there is a vertical & horizontal gap on each side of the seat back, about 14" tall x 1.5" wide, that exposes the metal frame behind it on each side. I'll be darned if I can find a part number let alone a description of what I'll guess are plastic moldings that go on on each side that covers these gaps. Any ideas? Description of the part's name or part number? Would post a pic if I could!
These are not the 'hockey sticks' that sit horizontally right under the sail panels btw.
-
Believe it or not, that unsightly gap is factory. No trim piece.
-
Ah! No wonder i can't find a part number! Thanks!