FE Power Forums
FE Power Forums => Non-FE Discussion Forum => Topic started by: machoneman on May 11, 2017, 04:30:28 PM
-
has formed on my gold cadmium plated Canton oil pan. Seems some of the cad plating has lifted as well. I can steel wool it off down to bare metal but will that anti-rust stuff one slaps on iron and steel be the right stuff to prevent more corrosion?
-
Scrape as much as you can off and sell it on the street corner.Then purchase new pan. ::)
-
Hah! Good one. :D
-
Here in SE Tx my Canton pan had the white stuff in under a year's time. The only cure IMO is to primer and paint, or powder coat it. But of course it needs to be off the car ;)
For my newest build, I'm going to go ahead and paint it first.
-
you guys not a fan of canton pans ?
-
Functionally, they are good pans.
Aesthetically, they all look like junk within a year's time.
I prefer Milodon pans if you like the zinc/dichromate/gold looking finish. They last a lot longer.
-
Thanks fellas. This issue took a while to surface. I don't intend to take the pan off. So, I'll scrape it in place and slap some paint on it.