FE Power Forums

FE Power Forums => FE Technical Forum => FE Engine Dyno Results => Topic started by: BBMTech on July 02, 2015, 05:20:53 PM

Title: Dyno results -Blair Patrick 482" with near stock as cast BBM heads - 666HP/636TQ
Post by: BBMTech on July 02, 2015, 05:20:53 PM

Here's another dyno sheet that Blair Patrick shared with us today. It's a standard 482" FE with BBM cast iron block and near stock BBM heads. These heads received very minor hand blending immediately under the valve seat, no porting work at all and no blending past the immediate valve seat area. We haven't got any other specs on the engine now, again we're fairly sure that once he has time Blair will chime in here with whatever he's comfortable sharing.

Again, we're extremely pleased with the results that our stock and near stock heads have now consistently achieved. 666 HP and 636 TQ with near stock heads out of 482 cu. in. (on pump gas!) is very satisfying to us and validates all the work that we've out into the as cast heads. Given these impressive results, it's exciting to think what our CNC heads will accomplish.

(http://i1288.photobucket.com/albums/b495/BBMTech/20150702_140100_zpsis6egwui.jpg) (http://s1288.photobucket.com/user/BBMTech/media/20150702_140100_zpsis6egwui.jpg.html)

Title: Re: Dyno results -Blair Patrick 482" with near stock as cast BBM heads - 666HP/636TQ
Post by: 427HISS on June 05, 2016, 07:30:41 PM

Hello, I realize this is a old thread, but apx how much would this engine cost ?
Regards.

Title: Re: Dyno results -Blair Patrick 482" with near stock as cast BBM heads - 666HP/636TQ
Post by: CaptCobrajet on June 10, 2016, 01:47:27 PM

$20,600 +/- for incidentals.

Title: Re: Dyno results -Blair Patrick 482" with near stock as cast BBM heads - 666HP/636TQ
Post by: 427HISS on June 24, 2016, 08:44:40 AM

The torque curve arnd low end numbers are amazing.
Good price also.

A dream engine for sure.