FE Power Forums
FE Power Forums => FE Technical Forum => FE Engine Dyno Results => Topic started by: BBMTech on July 02, 2015, 05:18:17 PM
-
Here's the dyno sheet that Blair just shared with us on a recent build he did. He'll likely chime in with all the engine specs when he has time, but basically it's a 445" 390-based stroker with out of the box BBM heads. No porting was done at all.
591 HP, 587 TQ with stock heads out of 445" on 93 pump gas - great work, Blair! We're pleased as more performance results come in verifying the performance of our heads.
(http://i1288.photobucket.com/albums/b495/BBMTech/20150702_140021_zpsl8yptqpx.jpg) (http://s1288.photobucket.com/user/BBMTech/media/20150702_140021_zpsl8yptqpx.jpg.html)
-
(Edit - the image files of the sheets are too large. Once I figure out how to shrink them to the max size that Jay's forum allows I will post them.)
What a coincidence, check out the post "Install" in the tech forum. It should be enough to walk you through the process for getting the pics on here. Your not the first to stumble into this. Don't worry, it really isn't too hard though. ;)
-
Done, and thanks!
-
No problem, glad you got it. 8)
-
1.32 here and 1.38 horsies per cube on the 482, on street engines. Pretty good numbers if you ask me.
I got a gander at both of these engines, plus a Super Stock engine he was delivering when we met up to do some dealing. Whoever gets these engines should be pretty happy.
-
Older thread, but the low down torque would make this combo a real nice street engine.
What are the specs ?
What's the apx cost ?
-
Bump...?
-
About $12,500 with a single carb. That one has a MR 2x4 dual plane. It'd be around $14K. The single carb RPM manifold and 850 carb would be real close on power on a combo like this. Maybe 10-15 less peak power, probably 20-25 lb/ft more torque mostly down low. It would probably be more appropriate to contact Brent or me in regards to prices. I'm not sure the intent of the dyno section here was to do public interweb price quotes. JMO. What say Mr. Jay on the subject??
-
Agreed.
Although it's not an advertisement and some people just want to know what stuff like this costs, I agree with Blair in that it's probably discussed off forum.
-
Man I'll tell ya, other than a side oiler or 428 to go in my Cobra, this 445's numbers is exactly,....what I want.
It actually may pass the 428 now.
I like the idea of it being a torque motor on the street and the low rpm & broad TQ curve is amazing !
Even at 3,500 rpm it's 556. Wow.....
What's wrong with posting prices ?
You don't have to post the exact cost making it a advertisement, if that's the issue.
There's a big difference between an ad,..... or guys just talking engine/parts with apx price.
It's like me researching the web for replacement patio doors, most want to come to your home to get pricing,
but I just want a figure, so if it's out of my price range, why waste my and your time ?
Also like sale ad's for cars, print your price rather than making me call, and wasting our time.
-
I see your point, it's not an advertisement, but then again, it's not my forum and Jay may have some other reasoning......or he may agree.
-
I also agree, it's up to him. No problem.
-
[quote author=427HISS link=topic=2828
What's wrong with posting prices ?
You don't have to post the exact cost making it a advertisement, if that's the issue.
There's a big difference between an ad,..... or guys just talking engine/parts with apx price.
It's like me researching the web for replacement patio doors, most want to come to your home to get pricing,
but I just want a figure, so if it's out of my price range, why waste my and your time ?
Also like sale ad's for cars, print your price rather than making me call, and wasting our time.
[/quote]
if your serious about buying a engine you need to talk in person and it's not wasting anybody's time ...... I know for a fact Blair's a two fingered typer (lol) It would take him hours to detail and price something on the net per everyones "how much" ...lol
-
lol, yes but, guy's like me that just need the basic info build, power numbers and price is pretty fast, especially if it is or almost a crate engine, the builder probably has a spec sheet and can post it easily. Then, if you want that engine, you need to call and chat details and final price.
On a different thread, Brent has most the information and price with his 445.
Many years ago when I had my Hot Rod business, I got so tired,.....of people calling me asking the same questions, that they could have just looked on my website, unless they did not have a computer. lol....
I'm a two finger guy also, so writing anything,....takes all fricken day ! ::)
-
I do believe BBM is gearing up for some brand new long blocks or crate engines ....which would be a standardized price deal here in the near future , Blair's stuff is totally custom built one on one per customer deal , I'm sure Brent is too
-
Have you heard when ?