FE Power Forums
FE Power Forums => Member Projects => Topic started by: Djr031987 on January 21, 2014, 04:00:26 PM
-
Hey does anyone know where you I can get one of the Paul Munro gear drive sets for my 427 SOHC. I just brought a new aluminium block from Shelby engines and I am trying to put it together.
-
I responded with Paul's email address in the 519 SOHC thread.
-
I've tried several email address for Paul Munro found on several threads without any luck....all undeliverable.
Does any one have a current email address. Thank you.
-
As far as I know Paul is out of the SOHC business. I don't have a current email address for him.
-
Robert Pond now sells the SOHC timing gear sets with the 0.250" pitch chains.
-
As far as I know Paul is out of the SOHC business. I don't have a current email address for him.
You're working with the foundry that cast his parts, right? Will you be continuing his low riser double carb tunnel ram? That was one of the best looking intakes for the SOHC.
-
Actually I'm working with his machine shop. They are continuing to make parts, in fact I should be getting one of his blower intakes in the next couple weeks. Paul's 2X4 manifolds will still be available also.
-
Jay, since you plan a FE Power SOHC head have you considered being a supplier for the parts that are still available from the machine shop that still makes the Munro parts?
-
Yes, I am planning on doing that. However, not all of Paul's parts are available from that shop, just the heads and the two intakes. Supply is a little spotty at this point, but when it improves I'll probably put the parts up for sale in the Vendor Classifieds.
-
That's great to hear, I will keep an eye out there!!
-
Jay what are the configuration of the 2 Monroe SOHC intakes ?
-
One is a blower intake, the other is a single plane 2X4 intake.
-
hi
yes jay is right
paul is out of the cammer parts business
he has some personal problems
and i can not see him getting back into it for a very long time
cheers
barry
-
Barry, what is your connection to this? I don't recall meeting you yet. :)
Welcome to the Forum.
-
hi
i am a friend of pauls and have known for a round 15 years
and i have one of his cammer kits in one of my mach 1
and he also bought a r code off me
cheers
barry
-
Black Thunder Welcome, I bought one of Paul's blower intakes and I got to talk to him a few times nice to talk to and the intake is good quite heavy though, and Jay thanks for making the Cammer better and the cool FE stuff you are making. Leny Mason
-
hi leny
thanks for the welcome
been on site for a long time
just dont post to often
if you do a search of my posts
you should see paul cammer kit in my mach 1
cheers
barry
-
Wow what fun I almost bought a Boss 9 with a cammer in it , I wish I could see in the future, so Paul is not well to bad he is a nice guy nice guy. Leny Mason