FE Power Forums

FE Power Forums => Vendor Classifieds => Topic started by: blykins on October 12, 2022, 07:09:06 AM

Title: I have 15 pair of Trick Flow heads available.....
Post by: blykins on October 12, 2022, 07:09:06 AM

Get them while they're hot.  $2480 a pair for the 1.550" hydraulic roller spring.  Plus shipping and taxes where applicable. 

Title: Re: I have 15 pair of Trick Flow heads available.....
Post by: 390xr7g on October 12, 2022, 05:28:40 PM

High Brent: I have 2 question. What is the shipping cost to Centennial Colorado 80122.
And how much extra is it to have the heads ported. M
Thanks 390xr7g

Title: Re: I have 15 pair of Trick Flow heads available.....
Post by: blykins on October 13, 2022, 04:40:37 AM

Shoot me an email and we can discuss it. brent@lykinsmotorsports.com

Title: Re: I have 15 pair of Trick Flow heads available.....
Post by: 62_BattleBird on October 21, 2022, 10:27:11 PM

Brent,

I’d like a pair, however would it be at all possible to have them ported to achieve the flow numbers and lift beyond .650 you mention in your TFS ported video?

Title: Re: I have 15 pair of Trick Flow heads available.....
Post by: blykins on October 22, 2022, 04:57:55 AM

Both of my porters have retired.   I'm looking for another. 

But FWIW, these heads out of the box will support 670 hp out of a 449ci engine with a .700" lift cam.   On a typical street 445, they will make 550 hp and 590 lb-ft with just a 231° intake lobe on a hydraulic roller, and make 15" of vacuum.

I know we made a big deal at the beginning when we first started using them about the flow backing up at .625-.650", but to be honest, I'm not really sure it puts a dent in anything.