FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: Bolted to Floor on September 06, 2021, 06:27:36 PM
-
Cost of part + shipping. If you see something you like but not the price, make me an offer.
Set of 16 adjustable rocker arms. They should be considered cores for rebuilding. Brand is unknown. Bores measured .844 or bigger. Some of the pads show wear. They do have the Crane adjuster screws and jam nuts. $90.00
(https://live.staticflickr.com/65535/51431328801_a96f3845f8_c.jpg) (https://flic.kr/p/2mmP1di)
(https://live.staticflickr.com/65535/51432072434_4d434d8ccd_c.jpg) (https://flic.kr/p/2mmSPgy)
(https://live.staticflickr.com/65535/51432300995_d1e03a3ea8_c.jpg) (https://flic.kr/p/2mmTZdg)
(https://live.staticflickr.com/65535/51431328536_ce2b71bdfa_c.jpg) (https://flic.kr/p/2mmP18J)
(https://live.staticflickr.com/65535/51432072164_051b0df203_c.jpg) (https://flic.kr/p/2mmSPbU)
(https://live.staticflickr.com/65535/51432300895_bdcc9cdf50_c.jpg) (https://flic.kr/p/2mmTZbx)
(https://live.staticflickr.com/65535/51431567008_4ef82f0c73_c.jpg) (https://flic.kr/p/2mmQe2j)
(https://live.staticflickr.com/65535/51432300335_74e5d81bbd_c.jpg) (https://flic.kr/p/2mmTZ1T)
Tunnel Tote Console for Mustang in 65-66 Parchment color made by TMI. $75.00
(https://live.staticflickr.com/65535/51430416947_d7f21b4c5d_c.jpg) (https://flic.kr/p/2mmJk9F)
(https://live.staticflickr.com/65535/51431174056_4108ec846c_c.jpg) (https://flic.kr/p/2mmNddh)
(https://live.staticflickr.com/65535/51431413538_c69f8d0128_c.jpg) (https://flic.kr/p/2mmPrph)
Ford FE timing chain. Came on remanufactured long block. No run time. I do not know the brand. The S321 on the cam sprocket show up in the pictures on Rockauto for a Melling standard duty timimng chain. $10.00
(https://live.staticflickr.com/7817/46337690205_b6b597d709_c.jpg) (https://flic.kr/p/2dAGLVc)
(https://live.staticflickr.com/7869/40287308403_6984e11765_c.jpg) (https://flic.kr/p/24o3Zcz)
(https://live.staticflickr.com/7906/46337691035_4920783142_c.jpg) (https://flic.kr/p/2dAGMav)
Holley Blue Fuel pump that’s been sitting in my tool box for years. I used it in the early 90’s for pumping water into a camper a few times a week over the course of 6-8 months. Never for gas. Motor runs and I would recommend a rebuild kit. $50.00
(https://live.staticflickr.com/7847/40560497633_2349895ae2_c.jpg) (https://flic.kr/p/24Nc9QH)
(https://live.staticflickr.com/7842/40560497153_808aedf512_c.jpg) (https://flic.kr/p/24Nc9Gr)
(https://live.staticflickr.com/7836/33649688428_10fb7a61df_c.jpg) (https://flic.kr/p/Tgvs2S)
Sold items will be deleted. Thanks for looking
-
Found a few more things!!
6 Eagle H Beam rods. Rods for cylinders 1 and 5 won’t be sold. These were in the motor that suffered a broke crank. Rod #2 shows some wear on the bearing. $200.00 You can see the details and carnage of the motor here. http://fepower.net/simplemachinesforum/index.php?topic=7597.15 I can send more pictures.
(https://live.staticflickr.com/65535/51378861491_ed3aac757d_c.jpg) (https://flic.kr/p/2mhb6vv)
Added price to push rods!
-
I'll take the intake manifold.
540-664-for four one ate
Jack
-
How much for the pushrods?
-
I'll take the fan blade. Pm sent.
-
Intake sold.
Got a PM about the rocker arms, not pushrods last night.
How much for the pushrods?
Whoops- $50.00 -- add updated with price
I'll take the fan blade. Pm sent.
I haven't seem a PM from you. You can text or call. 281-four seven five-5 one 36
-
I'll take the fan blade. Pm sent.
Dan, got the email. Let me figure out shipping. Fan blade sold pending payment. Thanks.
-
email sent, Thanks.
-
Oil pump and pick up screen sold.
-
Rocker arms are sold.
Thank you for helping me clean some stuff out of my garage. Its been fun being able to talk and text with you guys. ;D
Now I can put the funds to replace the water heater that started leaking over the weekend!!!