FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: ford88 on February 12, 2021, 06:56:40 PM

Title: 445 build
Post by: ford88 on February 12, 2021, 06:56:40 PM

looking for some input on a 445 build would like about 550hp pump gas mostly street with a few runs at track 4 speed car with 411 gear tell me what  parts i will need to get to this goal.

Title: Re: 445 build
Post by: blykins on February 12, 2021, 09:16:16 PM

Look in the dyno results section of the forum.  I have several builds that fit your criteria.

Title: Re: 445 build
Post by: Joey120373 on February 13, 2021, 03:56:46 AM

Yea, what Brent said.

But I’m guessing a set of TFS, BBM or Felony heads,
a performer rpm intake and a good cam will get you there without
Too much fuss.

Lots of good parts out there these days.

Power nation did a 445 build not to long ago, Think they hit 580hp using
Off the shelf parts.
They were showcasing the TFS top end with the TFS single plane.
 I think that combo would have been better with a perform RPM.
But still a nice easy combo to duplicate.