FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Stampeed on January 25, 2021, 04:43:48 PM

Title: Headers for CJ heads 1967 Mustang w/ PS
Post by: Stampeed on January 25, 2021, 04:43:48 PM

What headers are available to fit 428CJ heads and power steering in 67 Stang Please. Anything larger than 1 7/8"?
Brands Please. Thanks,Joe.

Title: Re: Headers for CJ heads 1967 Mustang w/ PS
Post by: 427mach1 on January 25, 2021, 09:52:48 PM

Try Mad Dog Headers, part number 4013, 2" headers that will work with power steering, Mustang 67 - 70.

Title: Re: Headers for CJ heads 1967 Mustang w/ PS
Post by: Blueoval77 on January 26, 2021, 11:36:19 AM

Has anyone tried those mad dog headers on a car with reinforcement straps ?

Title: Re: Headers for CJ heads 1967 Mustang w/ PS
Post by: Stampeed on January 26, 2021, 12:26:51 PM

I will look into those Mad Dogs. What about JBA 6655S. 1.75" but claim openings for fully ported heads. Thanks for the help, Joe

Title: Re: Headers for CJ heads 1967 Mustang w/ PS
Post by: Rory428 on January 26, 2021, 02:13:29 PM

I had the Hooker 6114 headers on my 70 428CJ 4 speed Mach 1 with power steering. Like virtually any PS car, you have to use the PS cylinder drop bracket. The Hookers are only 1 3/4" tubes I believe. They hang down some, but not too badly, especially compared to all the larger size tube headers. From what I understand, the FPA TriYs are very good for ground clearance, but again, not as large a tube size. I have FPA headers on my 428 CJ powered 59 Ford, and very happy with the quality and fit.

Title: Re: Headers for CJ heads 1967 Mustang w/ PS
Post by: 68fecyclone on January 26, 2021, 04:20:14 PM

Is the car a 4 speed or auto. Some of the larger tube headers will not work with a clutch linkage. Rob

Title: Re: Headers for CJ heads 1967 Mustang w/ PS
Post by: Stampeed on January 29, 2021, 11:13:09 AM

Yes this is a stick car