FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: Jim Comet on January 17, 2021, 08:18:09 PM

Title: street smart converters
Post by: Jim Comet on January 17, 2021, 08:18:09 PM

Have any of you guys had dealings with Street smart transmissions/converters out of Tennessee? My brother is thinking of using them for a converter build. I'm a little worried as they only recommended a 4000 stall for his 351C 4v motor. I was thinking more like 5000 to 5500 as this is a race only car with 4.30 rear gears. I'm just curious if anyone has input on them, good, bad or just ok. I tried to steer him towards Neal Chance, ATI or Dynamic but he stumbled on this guy and is pretty firm in using him. Thanks for your input. Jim

Title: Re: street smart converters
Post by: Falcon67 on January 19, 2021, 10:46:06 AM

That's way low, almost a "street" converter for a 351C.  My slow door car with 450 HP uses a 4600 stall.  I use Michael at Freakshow Performance here in Abilene Tx.  Good guy with good parts.