FE Power Forums

FE Power Forums => Vendor Classifieds => Topic started by: valvecover on February 27, 2013, 07:54:57 AM

Title: Aluminum Parts Polishing
Post by: valvecover on February 27, 2013, 07:54:57 AM

my name is Andy,i polish aluminum engine parts

i take paypal or throw a check in with the parts

pricing as follows

$65 diecast valve covers

$100 sand cast valve covers

$85 FE timing cover

$225 intake manifolds

$150 SOHC valve covers

$150 SOHC timing cover

$150 oil pan

you can reach me directly at valvecovers@live.com or 614-230-2340

(http://imageshack.us/a/img825/5195/picture050q.jpg)

(http://imageshack.us/a/img706/3097/kgrhqrpifdssd7efhbq4lqo.jpg)

Title: Re: Aluminum Parts Polishing
Post by: ScotiaFE on February 27, 2013, 08:58:06 AM

Missed a spot just above the oil filter. ::)

Title: Re: Aluminum Parts Polishing
Post by: BruceS on February 27, 2013, 12:27:20 PM

Andy,
Gotta love those M/Ts and that Cammer!  Do you strip, polish, and re-anodize exterior moldings?

Thanks,
Bruce

Title: Re: Aluminum Parts Polishing
Post by: valvecover on March 06, 2013, 12:39:40 PM

i dont mess with moldings,other people do that.

Title: Re: Aluminum Parts Polishing
Post by: valvecover on March 13, 2013, 07:19:20 AM

(http://imageshack.us/a/img96/3775/picture095eg.jpg)

Title: Re: Aluminum Parts Polishing
Post by: jayb on March 13, 2013, 12:53:47 PM

Say, those look familiar  8) 8)

Title: Re: Aluminum Parts Polishing
Post by: valvecover on March 16, 2013, 05:21:44 PM

just polished those for another SOHC owner,jay

got a lot better polishing these covers