FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: Royce on December 03, 2020, 04:40:40 PM

Title: Anybody got a 13/32 rod nut?
Post by: Royce on December 03, 2020, 04:40:40 PM

There is one missing from my 352/360 rods..  Attaboy and some beer money for someone who can help me out

Title: Re: Anybody got a 13/32 rod nut?
Post by: FERoadster on December 04, 2020, 11:33:47 AM

Royce: I've got a few  orphan 13/32 rods I've picked up over the years. Message me a name and address and I'll send you a couple nuts.
I'll use a CD mailing envelope.
Richard >>> FERoadster

Title: Re: Anybody got a 13/32 rod nut?
Post by: FERoadster on December 04, 2020, 02:04:16 PM

Struck out so far. I've got 8 rods with the large bolts but not a one has a nut on it.
I'll keep checking. Trying to get all of the FE bolts and nuts organized this next couple of weeks.
If you get desperate  I can take one off a set of 427 marine piston/rod assemblies but then I'll be short one.
Richard

Title: Re: Anybody got a 13/32 rod nut?
Post by: Royce on December 04, 2020, 03:49:56 PM

Thanks, but don't rob one from a complete rod...  I will wait until you do some digging  I appreciate the effort.
RB

Title: Re: Anybody got a 13/32 rod nut?
Post by: gt350hr on December 04, 2020, 05:11:07 PM

  Royce,
   Do you need the "stepped" 406-427 style or the no step 428 CJ style? I have both. PM an address and quantity. Or a gram weight.
   Randy