FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: turbohunter on November 16, 2020, 02:15:09 PM

Title: My KR buddy needs one of these
Post by: turbohunter on November 16, 2020, 02:15:09 PM

Hi’ y’all
Remember the story of the KR motor that I found and returned to the rightful owner?
That gentleman is looking for a CJ correct alternator bracket and hardware.
Pic below.
If you have this stuff would you get hold of me by pm and I will put you in touch with Gary.

(https://i.postimg.cc/B6J8JPxr/C17-D7-B4-E-91-B2-4-EA4-BDB1-F9-A42-CA3-A1-B1.jpg)

Title: Re: My KR buddy needs one of these
Post by: Keith Stevens on November 16, 2020, 03:11:51 PM

Tell him call Bill at Mansfield Mustang.  508.339.5409

Title: Re: My KR buddy needs one of these
Post by: turbohunter on November 16, 2020, 04:08:33 PM

Done.
Thanks Keith.

Title: Re: My KR buddy needs one of these
Post by: fomocoloco on November 16, 2020, 04:43:03 PM

i have that bracket as well as the alternator adjustment rod with multiple bends. i would sell them together.

jim oberg

Title: Re: My KR buddy needs one of these
Post by: turbohunter on November 16, 2020, 06:29:10 PM

Thanks Jim I’ll pm you

Title: Re: My KR buddy needs one of these
Post by: My427stang on November 17, 2020, 07:31:57 AM

Let me know if it falls through, I have the bracket, may or may not have the adjusting bolt and spacer

Title: Re: My KR buddy needs one of these
Post by: Keith Stevens on November 20, 2020, 03:58:30 AM

P.S. AMK offers the Concours bolt kit with spacer for about 22.00.

Title: Re: My KR buddy needs one of these
Post by: Stangman on November 20, 2020, 04:47:05 PM

Is this alternator mounted low. I thought that looked like the bracket for the low alternator mount

Title: Re: My KR buddy needs one of these
Post by: turbohunter on November 20, 2020, 04:52:44 PM

Dunno
I’m not familiar with the KR world.
Haven’t had any pm’s returned though.

Title: Re: My KR buddy needs one of these
Post by: DubyaTF on November 20, 2020, 05:16:43 PM

   He could also try calling Denny Aldridge. Link below:

 http://aldridgemotorsportsinc.com/pages/usedparts.html (http://aldridgemotorsportsinc.com/pages/usedparts.html)

Title: Re: My KR buddy needs one of these
Post by: turbohunter on November 20, 2020, 05:21:25 PM

Thanks, he already has an order with Mansfield that he could add the bracket to.
I was just hoping if someone had one hanging around we could help him out.
As you all know restoring a KR from the ground up is not for the faint of heart wallet wise.

Title: Re: My KR buddy needs one of these
Post by: Keith Stevens on November 20, 2020, 07:27:56 PM

I just finished my 1967 GT500. The crank damper for a PI runs a 1000.00 these days. It's worse. It uses a lot of odd obscure pieces. I know all too well. I did all the mechanical except setting up the differential and the machine work. All of the 68 cars have air injection so they bracketry is standard across the board.
Bill specializes in FE. That's all he does. Great to work with.

Title: Re: My KR buddy needs one of these
Post by: 427Fastback on November 20, 2020, 08:26:25 PM

Quote from: Stangman on November 20, 2020, 04:47:05 PM

Is this alternator mounted low. I thought that looked like the bracket for the low alternator mount

Yes...Alternator goes low and the air pump is above..Requires a special arm for the adjustment...

Title: Re: My KR buddy needs one of these
Post by: fomocoloco on November 21, 2020, 08:17:13 AM

yea it looks like a Chicago politician. I also have a NOS harmonic balancer. 7A.

jim

Title: Re: My KR buddy needs one of these
Post by: turbohunter on November 21, 2020, 08:50:11 AM

PM’d you Jim.