FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: gregaba on November 05, 2020, 12:18:48 PM

Title: Engine balancing video?
Post by: gregaba on November 05, 2020, 12:18:48 PM: Charles called me yesterday and said he has my crank assembly balanced It took 2 plugs in the rear 1- 3/4 oz-1- 1/2 oz and 1 in the front 1/2 oz.
While talking to him he said he took a video of the crank being balanced.
If anyone is interested I can post the process if I can figure how to post the video on this site.
Well go down there and pick up the assembly next Saturday if I don't have to work.
Greg
Title: Re: Engine balancing video?
Post by: turbohunter on November 05, 2020, 12:33:01 PM: Engine porn is always good.
Title: Re: Engine balancing video?
Post by: gdaddy01 on November 05, 2020, 06:52:41 PM: 2020 has been a balancing act .
Title: Re: Engine balancing video?
Post by: stubbie on November 05, 2020, 07:04:39 PM: Probably best to post to Utube Greg then post that link here.
Title: Re: Engine balancing video?
Post by: gregaba on November 06, 2020, 10:58:40 AM: thanks
I guess I will have to get a utube account.
Greg
Title: Re: Engine balancing video?
Post by: stubbie on November 06, 2020, 09:13:26 PM: Don't think you need one
Title: Re: Engine balancing video?
Post by: Keith Stevens on November 10, 2020, 01:03:04 AM: Is it a 428?
Title: Re: Engine balancing video?
Post by: gregaba on November 10, 2020, 06:59:45 AM: Yes it is.
Didn't have a 427 laying around to use all though I do have a 406 and a 410 in the shop. .
Greg
Title: Re: Engine balancing video?
Post by: Keith Stevens on November 14, 2020, 08:52:35 PM: When he balanced my engine It took two plugs. That was with the Eagle Rods, JE pistons and an aluminum 390 flywheel without the counterweight.
Title: Re: Engine balancing video?
Post by: gregaba on November 14, 2020, 09:44:40 PM: Mine is a 428 4.164 bore, racetec pistons, scat h beam rods. Internal balance, sfi flexplate as I will Be running a 6r80 trans with 433 rear detroit locker.
Greg