FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: FERoadster on November 04, 2020, 02:19:53 PM

Title: General Kinetics Cam F2H-300-U question
Post by: FERoadster on November 04, 2020, 02:19:53 PM

Found this cam I'd forgotten about on my shelf (along with a Crower, Isky and Edelbrock all still in boxes).
Here is the Cam Card. Would it be reasonable for a 4000+ lb. car 3.50 gears and a stick. Street use only 1948 Lincoln Continental.
Planning eventually upgrade to a  Ford 3X2 setup.
I've had this cam well over 20 years

Richard >>> FERoadster

Title: Re: General Kinetics Cam F2H-300-U question
Post by: gt350hr on November 04, 2020, 03:59:20 PM

   Yes I would use it for that. Looks an awful lot like the "Marine Hydraulic" cam Ford used to have. A bit more than the CJ or C8AX-C cam but good for what you are doing! Advancing 4*s will help it too.