FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: 6667fan on July 31, 2020, 03:49:23 PM
-
New shifter with rods for middle mounting position on a toploader.
$600.00 shipped.
Bumped this to include Jerico in the ad title.
-
Bumping this, can someone tell me if this shifter is a bolt on for a Jerico please? Or if not what is needed to make it usable for a Jerico.
Thanks much!
-
It may bolt right on to a Jerico, hard to tell. It looks like it could work, might want a couple spacers to offest the shifter off of the plate, so the shift arms and tubes have a straight shot. I don't think you need the counter sunk bolts, might just flip it around or it might line up with the Jerico bolt holes, they have two rows top and bottom. On Mine it looks like the bottom is in the center, but the lower hole in yours might still line up.
The one I have is slightly different as for the plate, but the shifter looks exactly the same.
(https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/123701411_10222093275293734_2463396243378347509_n.jpg?_nc_cat=109&ccb=2&_nc_sid=730e14&_nc_ohc=PxXkbTxgpe4AX-zYjVb&_nc_ht=scontent-lax3-1.xx&oh=1731d16f838075ada495838a811ab824&oe=5FC7D26F)
(https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/123140420_10222093275173731_8646123133091857119_n.jpg?_nc_cat=100&ccb=2&_nc_sid=730e14&_nc_ohc=hO8eVKHkGWUAX9uU8m0&_nc_ht=scontent-lax3-1.xx&oh=13aa859ef6bd960b8203af9326ed07ca&oe=5FC8B2A3)
(https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/123702204_10222093275813747_8055077121587674686_n.jpg?_nc_cat=105&ccb=2&_nc_sid=730e14&_nc_ohc=05vou-SnBaMAX_pXlrc&_nc_ht=scontent-lax3-1.xx&oh=d3f268756b7afcd5063ae1bcdbcf2a56&oe=5FC80D88)
Not mine but similar...
(https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/123768517_10222093275333735_3768291344537117138_o.jpg?_nc_cat=100&ccb=2&_nc_sid=730e14&_nc_ohc=2xYwayCSc68AX-6Pkfc&_nc_ht=scontent-lax3-1.xx&oh=78de69cf3a41afae5832ed0c54931748&oe=5FC5C239)
-
One more shot from the other side, not in focus... not all of it there, didn't find any other pics of just the shifter and/or plate.
(https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/123700635_10222093351815647_5000988186713487644_o.jpg?_nc_cat=101&ccb=2&_nc_sid=730e14&_nc_ohc=n7ccnJOTdBQAX_Me_ls&_nc_oc=AQnf63PgOn1Z72ljV09Fc3ZJgKxpXdthO_ktRr4z7QBsslwFrNLHk0jd3PIJ6cuy1UrZO2sFvTlS_d3jDaCC_6_w&_nc_ht=scontent-lax3-1.xx&oh=d48106dae7cbe68a14c3eca150d90a9d&oe=5FC5A14B)
-
The shifter arms/positioning look the same as when I had the shifter bolted to a TL. I have a pic which shows it but I cannot upload it here. Thanks for those pics!
-
Shifter sold