FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: BattlestarGalactic on June 25, 2020, 04:23:07 PM
-
Want to put a mech tach on the black car AND remove the unilite. I run one on the wagon, so would like to find similar unit. No crab caps! (Already have that version).
-
How soon do you need one? I've got a couple but will be away until Aug 1.
You do want the one with the small 2 piece cap?
Richard >>> FERoadster
-
Well, I would like to drive it before then. I appreciate the offer.
I have a very vintage YC model(two piece cap) with tach drive that I first ran in the wagon on the street in early 90's. It had issues so I replaced it with the YL model maybe 20 yrs ago. I had thoughts of going through it and see why it was screwing up(timing was constantly moving around causing random slowing down and not running the number). I might tear into it this weekend, if I have time, and see what I can do with it.
I could lock it down and just put a start retard on the 6AL box. Just another thought. This is why an old distributor machine would be handy to play with.
-
Well I had time to check today and have 2 YL and 2 YC Mallory's with tach drive provisions. One of the YC's however is about 3/4 inch taller to the cap mount not sure what's going on there, it's just a taller body. I'm not letting any caps go either crab or 2 piece.
They will still be available Aug. 1
Richard >>> FERoadster
-
The YL version in the wagon is only around 3 3/4" from intake to cap mounting surface. That is down from 5 1/4" tall for my YC and crab cap YL. I need that short body to clear the blower drive. Basically needs to be a factory distributor height.
-
Here is the actual part number:. 2655301. That is the version I need.