FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: james on June 03, 2020, 04:33:09 PM

Title: Window regulators question?
Post by: james on June 03, 2020, 04:33:09 PM

Are the front and passenger side window reguators on my 1966 mercury comet cyclone fit or can they be used for the rear windows? Also, do you know who would sell the rear widown regulators? Thank You!

Title: Re: Window regulators question?
Post by: wowens on June 04, 2020, 05:52:13 AM

I've never seen a 4 door car with the same regulators in front and rear doors in 46 years of collsion work, but, I do not know

Title: Re: Window regulators question?
Post by: FElony on June 04, 2020, 12:17:12 PM

Put a wanted ad in the Private Classifieds below.

Title: Re: Window regulators question?
Post by: TomP on June 04, 2020, 07:42:28 PM

The window regulators are pretty simple to repair. Where the actual crank is if it has a lot of slop back and forth or just turns you can take it apart. You will see little domed rivets around the crank, drill those out and you can see what's inside. Parts can be scavenged from any other 60's and 70's Ford window regulator if you need them.

Title: Re: Window regulators question?
Post by: FElony on June 04, 2020, 08:21:17 PM

More info if needed. http://www.torinocobra.com/forum/viewtopic.php?f=1&t=44358