FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: DEANs427 on May 10, 2020, 06:30:51 PM

Title: FE fenderwell headers
Post by: DEANs427 on May 10, 2020, 06:30:51 PM

custom made by "Headers by Ed" in the sixties to fit a MEL engine into a 55/56 Ford
they were used a short time and then hung in the rafters until I bought them in 2012.
I replaced the mount flange with a FE flange and modified the pipes to fit, (not much difference though). I have run these on my 56 gasser till now. there are many battle scars, welds and blemishes but still have life left in them.
equal length 1 7/8 tubes, 3" collectors
my first choice is to work a trade for a pair of cast aluminum y-block valve covers,
more pics and info at   dmdb1969@gmail.com

Title: Re: FE fenderwell headers
Post by: 351crules on May 13, 2020, 08:51:55 PM

any pictures of the headers install on the car? also will they clear the factory steering box



 

Title: Re: FE fenderwell headers
Post by: DEANs427 on May 13, 2020, 11:44:03 PM

#8 clears factory steering gear ok
double click on attached pics and they should give close-up view..
looking for other pics

Title: Re: FE fenderwell headers
Post by: 351crules on May 14, 2020, 08:07:35 AM

sent you an email