FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: gregaba on March 31, 2020, 03:51:08 PM

Title: 428 stroker
Post by: gregaba on March 31, 2020, 03:51:08 PM

Does anybody make a stoker  crank  [4.75 preferred] with the stock Ford bearing diameter's?
Thanks
Greg

Title: Re: 428 stroker
Post by: blykins on March 31, 2020, 04:20:41 PM

A 4.75” won’t fit in an FE.  You’re gonna be limited to about 4.375-4.400. 

The other answer is no.  A BBC journal is actually preferred in a performance application.

Title: Re: 428 stroker
Post by: gregaba on March 31, 2020, 04:59:58 PM

OK
Thanks
i wasn't sure how big a stroker would fit and I was almost sure no one made a Ford bearing size crank, I thought I would ask.
Greg