FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: 57 lima bean on March 28, 2020, 05:18:56 PM

Title: C6 servo heat shield
Post by: 57 lima bean on March 28, 2020, 05:18:56 PM

Did Ford make such a part?Looked for sometime.The web in contaminated with vette stuff.

Title: Re: C6 servo heat shield
Post by: TomP on March 29, 2020, 01:22:52 PM

I doubt they did but yes searching for anything C4 or C6 requires wading through a bunch of GM BS. 
I am sure the BMW folks thank Ford guys for not being such simpletons and Mustangs aren't called M3, M5, etc.

Title: Re: C6 servo heat shield
Post by: babybolt on March 29, 2020, 10:00:48 PM

Have never seen a C6 trans with a heat shield over the servo.

Title: Re: C6 servo heat shield
Post by: Falcon67 on March 30, 2020, 11:16:16 AM

Be easy enough to make a shield out of .030 or .040 aluminum sheet.

Title: Re: C6 servo heat shield
Post by: thatdarncat on March 30, 2020, 12:08:28 PM

Quote from: Falcon67 on March 30, 2020, 11:16:16 AM

Be easy enough to make a shield out of .030 or .040 aluminum sheet.

Steve did just that a couple days ago. Insulated with header wrap.

(https://i.postimg.cc/sf4KdMqs/95-A39276-F4-E9-4-F38-AF1-D-5-FE2-A5-C42-A15.jpg) (https://postimg.cc/fkkYYRMr)

Title: Re: C6 servo heat shield
Post by: Royce on March 30, 2020, 12:40:28 PM

I nominate that for best new product award at SEMA 2020

Title: Re: C6 servo heat shield
Post by: Falcon67 on March 30, 2020, 02:26:34 PM

Quote from: Royce on March 30, 2020, 12:40:28 PM

I nominate that for best new product award at SEMA 2020

You have a 2nd!  Call for a voice vote

Title: Re: C6 servo heat shield
Post by: 57 lima bean on March 30, 2020, 03:19:02 PM

                  The Servo Saver 3000 is available at all Yestertech outlets.

Title: Re: C6 servo heat shield
Post by: Falcon67 on March 31, 2020, 03:51:24 PM

Figured there'd be a Kickstarter or something there   ;D

Title: Re: C6 servo heat shield
Post by: 57 lima bean on March 31, 2020, 04:52:44 PM

Quote from: Falcon67 on March 31, 2020, 03:51:24 PM

Figured there'd be a Kickstarter or something there   ;D

     

     LOL....Yes,it does have that look.It is certified N95 tho.

Title: Re: C6 servo heat shield
Post by: Royce on March 31, 2020, 06:33:33 PM

Wasn't that in the MAS catalog?

Title: Re: C6 servo heat shield
Post by: 57 lima bean on March 31, 2020, 07:10:16 PM

Quote from: Royce on March 31, 2020, 06:33:33 PM

Wasn't that in the MAS catalog?

    Funny you mention that.The shield is bolted to a pan that was cast at Brom manufacturing in Fridley Mn. and packaged/sold at MAS.I believe all the molds sold to TCI many years ago. 
   I'm also visualizing a large black wallet chained to my transmission with Falcon67's comment.