FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Stangman on March 02, 2020, 01:59:04 PM

Title: modulator gasket
Post by: Stangman on March 02, 2020, 01:59:04 PM

Hey guys I have a c-6 modulator (screw in) and need the gasket is there a part number for that or do I have to buy a modulator to get it.

Title: Re: modulator gasket
Post by: Faron on March 02, 2020, 11:29:30 PM

An Oil drain plug Gasket will work its a 1/2 hole a thin Copper one also will work fine

Title: Re: modulator gasket
Post by: thatdarncat on March 03, 2020, 12:50:30 AM

I have an extra, if you want it PM me your mailing address and I’ll send it to you.

If you have any transmission shops near you they probably have an extra, every gasket & seal kit comes with one, but not always needed if they are building a later transmission with the push-in modulator. C6 & C4 screw in modulators use the same gasket. It’s a thin paper gasket. Ford part number is C1AP-7B426-A.

(https://i.postimg.cc/cHTtyQ5d/C3E62BA8-CB29-4C70-A299-8DDE7920D3C5.jpg) (https://postimg.cc/1nn3DNQd)

Title: Re: modulator gasket
Post by: cjshaker on March 03, 2020, 08:10:03 AM

Neat ruler, Kevin. Never seen one that was marked in 32nds and 64ths like that. We have some guys at work that desperately could use something like that..lol

Title: Re: modulator gasket
Post by: Stangman on March 03, 2020, 09:33:13 AM

Thank you guys, I might have one coming today if not I might take you up on that
That darn cat.

Title: Re: modulator gasket
Post by: 1964Fastback on March 03, 2020, 09:36:48 AM

I was intrigued by the ruler as well.  It looks like this one, $2.31 at Amazon:

https://www.amazon.com/Johnson-Level-Tool-7202-Contractor/dp/B00004T7ZU

Pat

Title: Re: modulator gasket
Post by: e philpott on March 03, 2020, 09:46:25 AM

you can make a gasket for those super easy with some thick paper or thin cardboard if you can't find one  . You can get those rulers in metric , Metric and American combo that has conversion charts on them along with decimal to fraction conversions too , it's nice to have an assortment

Title: Re: modulator gasket
Post by: Stangman on March 03, 2020, 09:19:44 PM

Got one today guys I appreciate it. Thank You