FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: hwoods on February 25, 2020, 10:04:08 PM

Title: lunati cam
Post by: hwoods on February 25, 2020, 10:04:08 PM

Solid Roller Cam. Good cam for bracket racing ap- plications with 390-428 c.i. motors. Needs 4000-4500 RPM stall converter or 4-speed transmission, headers, 11.5:1+ compression ratio and 4.56+ gearing. Rough idle. ;Advertised Duration (Int/Exh): 314/324 ;Duration @ .050 (Int/Exh): 272/284 ;Gross Valve Lift (Int/Exh): .707/.711 ;LSA/ICL: 108/106 ;Valve Lash (Int/Exh): .022/.024 ;RPM Range: 4500-7500 ;Includes: Cam & Lifters (#72434-16)


anybody running something like this cam?

Title: Re: lunati cam
Post by: blykins on February 26, 2020, 06:31:32 AM

What size engine?  Heads? 

Title: Re: lunati cam
Post by: hwoods on February 26, 2020, 08:27:15 AM

482 ".  Bear Block Motor Heads   Thanks