FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: simonlegree on February 07, 2020, 05:28:46 PM

Title: WTB 428 Ford Standard pistons
Post by: simonlegree on February 07, 2020, 05:28:46 PM

Hey FE guys, I'm looking for a set of 428 Ford pistons with a standard bore. I'd like to buy Sealed Power/TRW's or what ever is out there. New or  good used would be good, preferably new. Let me know what you have if your looking to sell.
Thanks.
Steve Legree

Title: Re: WTB 428 Ford Standard pistons
Post by: 67428GT500 on February 08, 2020, 12:10:03 AM

I have a set of Ford/TRW NOS forged pistons. They were pop-ups that I had milled to flat tops with eyebrow reliefs. The engine was balanced so they are all matched weight. I put 366 miles on them before having a 4.130 bored 390 block crack where it was bored too thin. I wound up having to get .020 JE pistons for the new block.
                                                               -Keith

Title: Re: WTB 428 Ford Standard pistons
Post by: MeanGene on February 08, 2020, 12:02:17 PM

I have a few sets, probably more than I need- can take a look

Title: Re: WTB 428 Ford Standard pistons
Post by: simonlegree on February 08, 2020, 01:30:23 PM

If you will, give me a quote on pricing and shipping, I'm in Boise Idaho.
Thanks gents.

Title: Re: WTB 428 Ford Standard pistons
Post by: My427stang on February 09, 2020, 03:34:40 PM

Let me know if the others fall through, I have a set of factory Ford I just took out of a std bore 66 block. I want the rods but no need for the pistons

Title: Re: WTB 428 Ford Standard pistons
Post by: simonlegree on February 09, 2020, 06:18:04 PM

Keith, do the pistons include pins and locks? Do you have a picture or can you call me. Phone number is (562) 242-5924. address is 12680 W. Running Brook Drive, Boise ID. 83713. I'm pretty interested in your offering

Title: Re: WTB 428 Ford Standard pistons
Post by: 67428GT500 on February 10, 2020, 03:06:36 AM

They do have pins and locks. I don't recommend reusing spriroloxs.  The pistons skirts are all de-burred as well to help with future skirt issues.
I presume that is your cell? If so I can message you a picture.
                                                                                -Keith

Title: Re: WTB 428 Ford Standard pistons
Post by: T U Bar on February 16, 2020, 09:17:09 AM

https://billings.craigslist.org/pts/d/great-falls-ford-parts-428-ford-pistons/7066779397.html
Good luck.