FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: Lenz on January 21, 2020, 04:11:20 PM

Title: Looking for a factory bellhousing
Post by: Lenz on January 21, 2020, 04:11:20 PM

WTB '64 narrow case top loader bell housing or a dual pattern bell produced later that permits a narrow case attachment behind an FE in a car.  This is not for the sake of originality, only to get something close to the right part without going aftermarket.

Title: Re: Looking for a factory bellhousing
Post by: thatdarncat on January 21, 2020, 05:21:13 PM

There a C3AA-6394-A one with 3E1 date for sale on the FE Fanatics Garage Sale Facebook page. Just passing on the tip, don’t know the seller.

(https://i.postimg.cc/fbWfNQ7z/CA2727-C3-0-B0-B-4-E6-B-ADD8-67-BB924-A065-F.jpg) (https://postimg.cc/75c23cQd)

Title: Re: Looking for a factory bellhousing
Post by: Lenz on January 21, 2020, 05:23:42 PM

thx, I'll follow it up.

Title: Re: Looking for a factory bellhousing
Post by: 67xr7cat on January 21, 2020, 07:36:01 PM

I have one came with a 63 427 I bought. Is the narrow pattern only. $150 plus shipping

Title: Re: Looking for a factory bellhousing
Post by: Lenz on January 22, 2020, 08:43:51 AM

PM sent

Title: Re: Looking for a factory bellhousing
Post by: 67xr7cat on January 23, 2020, 10:38:54 AM

The bell looks like is earlier one. Internet says FE 58 to 64 t10, but you best research it for yourself. PN: 4848339 date 1E11.
I will try to post some pics. Thx. Steve

Title: Re: Looking for a factory bellhousing
Post by: 67xr7cat on January 23, 2020, 11:14:08 AM

Here are some pics