FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: olman on October 31, 2019, 12:20:03 AM

Title: T-10 gasket and seal kit
Post by: olman on October 31, 2019, 12:20:03 AM

First off this is for my factory T-10 that was behind a 390 and now a 428 in my 63 1/2 fastback XL. Need to change out the gaskets, seals and tailhouse bushing. Do all T-10s including the Super T-10 take the same gasket set and seals and bushing?
  And wondering what is the difference betwn the T-10 and the Super T-10 so I will not ask these dumb questions anymore.
  If anyone has a suppliers name I would also appreciate that too.
  Got a guy in the next town that will do this for me cuz I don't know much about transmissions
           Thanks!

Title: Re: T-10 gasket and seal kit
Post by: The Real McCoy on October 31, 2019, 08:55:57 AM

D and L Transmissions out of New York. 631-351-4837. Very knowledgeable and very helpful on my T-10 for my Galaxie.

Title: Re: T-10 gasket and seal kit
Post by: gt350hr on October 31, 2019, 10:28:14 AM

The gasket sets are the same and will include gaskets you don't need. Match those in the kit to the originals and you'll be fine. The difference between a "regular " and super in on the output shaft and gears , not the case. ( until much later year over the counter units)
    Randy

Title: Re: T-10 gasket and seal kit
Post by: gdaddy01 on October 31, 2019, 01:06:54 PM

Don't forget the shifter arm seals - o-rings .