FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: John67427 on September 07, 2019, 03:52:26 PM

Title: Blue Thunder - HI Rise aluminum head torque specs
Post by: John67427 on September 07, 2019, 03:52:26 PM

Would anyone have any info on torque specs? Blue Thunder aluminum Hi Rise heads on aluminum Shelby block. Going to have to do some maintenance and realize I have no info for torque specifications.

Title: Re: Blue Thunder - HI Rise aluminum head torque specs
Post by: 67428GT500 on September 08, 2019, 02:07:06 AM

The listing is for ARP Studs. 95 FTLB in two increments with ARP lube.

Title: Re: Blue Thunder - HI Rise aluminum head torque specs
Post by: CaptCobrajet on September 08, 2019, 08:34:28 AM

Be sure that you have anti seize on the studs in the block.  I torque the studs in the Shelby blocks to 15-20 to be sure the buttons are seated properly in the bottom.  With ARP lube on the washers and nuts, I would go "snug" in sequence, then 50 in sequence, 75 in sequence, and then 100 in sequence.

Title: Re: Blue Thunder - HI Rise aluminum head torque specs
Post by: John67427 on September 09, 2019, 08:19:32 PM

Thank you for the reply’s !!!