FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: JamesonRacing on July 13, 2019, 01:49:58 PM

Title: SOLD - NEW Edelbrock P-RPM 71054 Endurashine FE intake manifold
Post by: JamesonRacing on July 13, 2019, 01:49:58 PM

Have a new Edelbrock Performer RPM intake manifold, PN 71054. Same as the 7105, except with the chrome-like Endurashine finish.

Some port-matching was started on one side to LR (1246 gasket) size, but the ports are untouched on the other side.  You'd want to finish the port matching before installing this manifold.

Beautiful intake, wish I had another engine to install it on.  These are almost $700 at most outlets, I'm asking about what Summit gets for a new uncoated P-RPM.

Title: Re: NEW Edelbrock P-RPM 71054 Endurashine FE intake manifold
Post by: 67428GT500 on July 13, 2019, 03:32:09 PM

It was provided in MR port size. You mean someone converted it to the LR port configuration.

Title: Re: NEW Edelbrock P-RPM 71054 Endurashine FE intake manifold
Post by: JamesonRacing on July 13, 2019, 04:04:19 PM

Quote from: 67428GT500 on July 13, 2019, 03:32:09 PM

It was provided in MR port size. You mean someone converted it to the LR port configuration.

Corrected.  Thanks