FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Dieselman966 on June 21, 2019, 11:34:42 PM

Title: 65 galaxie headers on for motor installation
Post by: Dieselman966 on June 21, 2019, 11:34:42 PM

I'm getting ready to put my 352 back into my 65 galaxie. I'm wondering if I can get away with having the sanderson headers and starter on before I drop back into the car.  I pulled the headers off when I pulled it but it would be awesome if I could install them with the engine out on the stand still.

Title: Re: 65 galaxie headers on for motor installation
Post by: cattleFEeder on June 22, 2019, 09:36:59 AM

I see no reason not too, makes life easier. I did it in a 66 Fairlane should be a breeze in a galaxie.

Title: Re: 65 galaxie headers on for motor installation
Post by: Dieselman966 on June 22, 2019, 06:20:13 PM

I'll give it a try here in the next week or so and report back with my findings.

Title: Re: 65 galaxie headers on for motor installation
Post by: 67428GT500 on June 22, 2019, 08:50:12 PM

No way in hell you could get Hookers in a Shelby with them on. The headers above tuck nicely.

Title: Re: 65 galaxie headers on for motor installation
Post by: Dieselman966 on June 29, 2019, 06:35:53 PM

I installed the 352 today with all accessories attached.  Went in pretty easy with the Sanderson headers I have on the motor.

Title: Re: 65 galaxie headers on for motor installation
Post by: 67428GT500 on June 29, 2019, 07:44:45 PM

A 352 into what? I Galaxie, Truck?  The shock tower cars it isn't happening with the exception of one and some shorties.

                                                                                                            -Keith

Title: Re: 65 galaxie headers on for motor installation
Post by: thatdarncat on June 29, 2019, 09:37:39 PM

Quote from: Dieselman966 on June 21, 2019, 11:34:42 PM

I'm getting ready to put my 352 back into my 65 galaxie.

First post.