FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: 67428GT500 on June 09, 2019, 11:28:53 PM

Title: Anyone have a roller they elected not to run?
Post by: 67428GT500 on June 09, 2019, 11:28:53 PM

I am looking at possibly changing to a roller valvetrain.  Does anyone have something they decided not to run that's hydraulic and won't have such a low vacuum that I can't run power brakes? I am looking for something complete. Used is fine providing it's good to go.

Title: Re: Anyone have a roller they elected not to run?
Post by: HarleyJack17 on June 10, 2019, 11:43:47 AM

Solid Roller or Hydraulic Roller? Engine specs or goal you have in mind.  I have a hydraulic roller with a few dyno runs on it... I am on the fence about letting go.

Title: Re: Anyone have a roller they elected not to run?
Post by: 67428GT500 on June 10, 2019, 06:28:38 PM

Hello: 428 B&P edelbrock heads 2.19INT 1.75 Exh. 9.9 CR, C7ZX dual quad, roller rockers, heavy duty shafts, billet stands and end stands....

Title: Re: Anyone have a roller they elected not to run?
Post by: 6667fan on June 11, 2019, 08:46:39 PM

Hello,
I have a new small solid roller, ( Crower), and lifters, ( Ersons). Do a search in this forum. Price will be less than what was listed.
JB

Title: Re: Anyone have a roller they elected not to run?
Post by: 6667fan on June 14, 2019, 02:49:45 PM

Keith,
Please try me at
413-six95-three one 03 till 9:00 EST
Thanks,
JB

Title: Re: Anyone have a roller they elected not to run?
Post by: 6667fan on June 15, 2019, 07:19:31 AM

Sent you a pm.