FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: winr1 on May 04, 2019, 07:48:39 PM

Title: 1965 F100 rear axle flange pattern.. a little help please
Post by: winr1 on May 04, 2019, 07:48:39 PM

A rough measurement with verniers shows center to center

Vertical, around 2.445

Horizontal, 3.875

Hole, 3.150

The flange itself looks like a Big Ford early, round except the top slopes down as a tent

I cant find any info on the internet



Ricky.

Title: Re: 1965 F100 rear axle flange pattern.. a little help please
Post by: chris401 on May 05, 2019, 05:27:01 AM

Quote from: winr1 on May 04, 2019, 07:48:39 PM

A rough measurement with verniers shows center to center

Vertical, around 2.445

Horizontal, 3.875

Hole, 3.150

The flange itself looks like a Big Ford early, round except the top slopes down as a tent

I cant find any info on the internet



Ricky.

A while back there was a new pair for sale on Slicl60s.com in the classifieds. I do not know there original application but they fit slicks. Don't remember the post title.

Title: Re: 1965 F100 rear axle flange pattern.. a little help please
Post by: BattlestarGalactic on May 05, 2019, 07:45:49 AM

(https://www.quickperformance.com/assets/images/axle_order_2.gif)

The "new" style just has a smaller retainer bolt circle.   The old ones have larger pattern.