FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: Stangman on April 26, 2019, 04:20:48 PM

Title: Powdercoating
Post by: Stangman on April 26, 2019, 04:20:48 PM

So dad bought a kit car 33 roadster, control arms have bushings in it, can they be powder coated with them in it. I havent seen them myself to see if they can be pressed out. I would imagine they can. Maybe the heat isn’t too that bad.

Title: Re: Powdercoating
Post by: JERICOGTX on April 27, 2019, 04:18:43 AM

They need to be removed.

Title: Re: Powdercoating
Post by: Stangman on April 27, 2019, 06:45:38 AM

Ok thanks I thought so.

Title: Re: Powdercoating
Post by: 67428GT500 on April 28, 2019, 09:43:39 AM

Powder coating is usually baked at about 400 degrees. Rubber or polyurethane doesn't hold up under those temperatures. They have to be removed.

                                                                                       -Keith