FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: gregaba on April 11, 2019, 12:59:59 PM

Title: block in machine shop and
Post by: gregaba on April 11, 2019, 12:59:59 PM

Now I need a good reliable shop to do my heads.
My guy won't be able to get to my heads for 2 to 3 months so I am looking for a good shop in the south central Oklahoma north Texas area who will do the heads the way I want. No surprises.
I have a set of aluminum heads [new] at an auction for $300.00.
I need a 3 angle valve job, new posi locks, and the guides clearenced.
thanks
Greg

Title: Re: block in machine shop and
Post by: 67428GT500 on April 11, 2019, 10:14:11 PM

Try Jamie at WCH Engines in Midlothian, Tx.
http://wchracingengines.com/
                                                  -Keith

Title: Re: block in machine shop and
Post by: gregaba on April 15, 2019, 10:35:54 AM

thanks Kieth
I will call them.
Greg

Title: Re: block in machine shop and
Post by: gregaba on April 15, 2019, 11:40:28 AM

Hi keith
Called and talked to them. I will be taking my heads to them next week along with the crank assembly to have it balanced.
Thanks again
Greg

Title: Re: block in machine shop and
Post by: 67428GT500 on April 18, 2019, 10:20:49 PM

Tell Jaime Capt. Keith says: Suck it!  I fly for American. He knows who I am. 8)

                                                -Keith