FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: fomocoloco on April 03, 2019, 06:53:19 PM

Title: value of "C" scratch 7M22 block
Post by: fomocoloco on April 03, 2019, 06:53:19 PM

i'm looking for an approximate value on a std bore SHORTBLOCK C7MEA block date code 7M22. thanks.

jim

Title: Re: value of "C" scratch 7M22 block
Post by: preaction on April 03, 2019, 08:42:57 PM

Does it have a Vin number on the drivers side rear of the block ?

Title: Re: value of "C" scratch 7M22 block
Post by: fomocoloco on April 04, 2019, 08:07:38 AM

don't know yet. probably a pi block but i don't know. just know the date code and c scratch and bore. too early for a CJ.

jim

Title: Re: value of "C" scratch 7M22 block
Post by: 6667fan on April 04, 2019, 08:15:03 AM

Curious,
What did the 135 cars have for casting dates on their blocks? Is a December block ruled out?
JB

Title: Re: value of "C" scratch 7M22 block
Post by: Gregwill16 on April 04, 2019, 08:53:36 AM

Based on what I have read, this block is about 1 week too late to be a candidate for a 135 car. They were built in the same week this block was cast. Supposedly they had mid December dated blocks. But what I would do is look for an assembly date on the front knorbs below head deck to give a better clue.
From a value standpoint, if it checks out good, it should be in the $2500-3k range mostly if someone needs that date.

Title: Re: value of "C" scratch 7M22 block
Post by: fomocoloco on April 04, 2019, 02:37:26 PM

THANKS.

Title: Re: value of "C" scratch 7M22 block
Post by: BH107 on April 05, 2019, 09:25:03 AM

I had one a few years ago. Too late for a 135 car, too early for a production CJ by a few months. Likely just out of a full size car, so no real date correct value. The one I had ended up as someone’s race engine.

Title: Re: value of "C" scratch 7M22 block
Post by: fomocoloco on April 07, 2019, 06:45:28 PM

i got it home. C7MEA STD BORE. 7M20. machine date 8A4. short block. no vin # on the block. still has cast pistons. no ring ridge.

jim

Title: Re: value of "C" scratch 7M22 block
Post by: FERoadster on April 07, 2019, 08:40:43 PM

don't know yet. probably a pi block but i don't know. just know the date code and c scratch and bore. too early for a CJ.
jim

You stated to early for a CJ block. What is the start date for CJ's?
The rebuilt short block I have is a C scratch +030 and dated 8A9. 1U crank. Could this be within the CJ timeframe?
Thanks
Richard  >>> FERoadster

Title: Re: value of "C" scratch 7M22 block
Post by: fomocoloco on April 08, 2019, 07:14:28 AM

that was a guess on my part. i have never been a mustang guy. pickups are my forte. i have an 8A28 engine that is a PI. it has a vin on it. all i know is that this engine or motor whatever you want to call it looks very good. he said it didn;t have enough power. had CJ heads on it an a split port offenhauser intake on it prior to dissecting. i got all the miscellaneous parts. i will take the short block apart soon as tax season is over. i am a CPA and don;t have the time now but next week maybe. by the end of april it should be out of the hot tank.

jim