FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: chilly460 on April 02, 2019, 07:12:45 AM

Title: Parts available at FE Reunion
Post by: chilly460 on April 02, 2019, 07:12:45 AM: Now that it's April, I'll start digging out parts that I can bring to the FE Reunion if anyone is interested. Will get pics tonight.

1) Pair of C5AE Medium Risers, rebuilt with stainless valves. One is a '65 casting, one is a '70, some thumbprint left. These are in excellent shape, some port work done on intake of one head. $1500
2) Set of adjustable rockers, nice shape $250
3) ~~Pair of C8OE-N CJ heads. Cut for positive valve seals, one exhaust ear repair. $400~~ - SOLD
4) ~~Rotating assembly to make a 416". Autotec pistons, Eagle rods, factory 3.98" crank turned .020" (may need polishing).~~ $1000
Title: Re: Parts available at FE Reunion
Post by: fekbmax on April 06, 2019, 03:29:54 PM: If anyone is interested I have a 460 DoVe block at .030 over. Perfect for 4 bolt main caps.
Also have a 351C 4bolt main block standard. Has a water jacket repair but it's a really nice repair and has been pressure tested.
I'm looking for $300.oo each
Not gonna drag them with me unless someone is truly interested.
Will have some fe stuff as well.
Title: Re: Parts available at FE Reunion
Post by: BBFORDFAN on April 17, 2019, 02:27:27 PM: p/m sent on heads
Title: Re: Parts available at FE Reunion
Post by: shady on April 17, 2019, 05:54:12 PM: Stuff I can bring to the Beave.
One pair of ratty, rusty '64 Gal XL front seats. Complete minus the track springs & tie bar on one seat. Obviously need redone $275
5 bolt early small block stick bell $175
a pair of '65 Mustang 225hp gold valve covers. Crusty, some rust but no dents $50 for the pair
'64 Comet speedo head $50
'64 Comet side trim inserts. Both front fenders, both doors and one quarter. $175
'64 Comet both rear tail light bezels $75
A nice rust free 82 - 92 Ranger tailgate with a really nice big square alum. center piece $ 150
A pair of '61 Gal nos Glow Bright tail light lenses $40
One nos aftermarket '56 Ford front turn signal lens $15
'63 F100 hood trim. All 3 pieces nicely pitted for $30

PM me for pictures. I'll hold all parts & pay me at beaver, only when the parts meet your expectations.
Title: Re: Parts available at FE Reunion
Post by: CDXXVII on April 17, 2019, 08:41:28 PM: I can bring a 1961 dated 1x4 aluminum intake. 390ci/375hp. $400 cash only.
Title: Re: Parts available at FE Reunion
Post by: chilly460 on April 23, 2019, 04:54:48 AM: ~~Comp XE274h cam and lifters, installed but never run $100~~ - SOLD

~~Eagle CRS6490F3D rods new in box (stock FE dimensions) $350~~ - SOLD
Title: Re: Parts available at FE Reunion
Post by: 67428GT500 on April 23, 2019, 06:02:13 AM: These show to be Chevy dimensions in the Summit catalog.
Connecting Rods, ESP 4340 H-Beam, Cap Screw, Bushed, Chevy, Big Block, Set of 8.
Title: Re: Parts available at FE Reunion
Post by: chilly460 on April 23, 2019, 10:34:23 AM: Typo in the part number, corrected now

https://www.summitracing.com/parts/esp-crs6490f3d
Title: Re: Parts available at FE Reunion
Post by: 67428GT500 on April 23, 2019, 11:18:27 AM: They are stock FE length and bearing journal?
-Keith
Title: Re: Parts available at FE Reunion
Post by: chilly460 on April 23, 2019, 11:44:21 AM: Yes, match stock 390/427/428 rod dimensions.
Title: Re: Parts available at FE Reunion
Post by: chilly460 on April 24, 2019, 07:15:39 AM: Can bring two cranks with me:
1) 390 cut .010/.010 in good shape $75
2) 428 cut .020/.030, will need a polish to touch up light surface rust $200
Title: Re: Parts available at FE Reunion
Post by: chilly460 on April 29, 2019, 02:33:11 PM: I will split up the Medium Risers if anyone needs a single.
Title: Re: Parts available at FE Reunion
Post by: 67428GT500 on April 29, 2019, 03:49:43 PM: I wanted the con rods being I asked first.
Title: Re: Parts available at FE Reunion
Post by: chilly460 on April 29, 2019, 06:42:06 PM: Well, what can I say, last response was a question then no communication, I don’t see any reference to you wanting them? Tons of tire kickers online, I’m not a mind reader.
Title: Re: Parts available at FE Reunion
Post by: 67428GT500 on April 29, 2019, 10:52:20 PM: There was an error in the part number. It's why I didn't confirm. When I returned someone else jumped on them. The original number was for Chevy Journals.