FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Leny Mason on March 09, 2019, 01:22:11 PM

Title: Not the right Cams
Post by: Leny Mason on March 09, 2019, 01:22:11 PM

Well My Engine was almost together until we were setting up the cams and found out the cams are not what they are supposed to be, what a disappointment I bought these cams in 2006, that is the problem with taking your whole life to finish a project but everything cost money, but Jay Brown came to the rescue and ordered the right ones for Me, we are coming along with the body work paint job it is black so a lot of sanding, Thanks Jay. Leny Mason 

Title: Re: Not the right Cams
Post by: 428 GALAXIE on March 09, 2019, 02:40:12 PM

Don't know nothing about nothing but that degree wheel should be accurate enough 8)

Title: Re: Not the right Cams
Post by: ntheogen on March 09, 2019, 03:49:21 PM

Matt called me Leny and asked me about some and I called a buddy I thought could help but still haven't heard back from him on cams. I'm glad Jay was able to order what you needed. Looking forward to seeing this thing come to life.

Jack

Title: Re: Not the right Cams
Post by: TomP on March 09, 2019, 03:52:06 PM

Imagine what that degree wheel would look like on a 289!

What was wrong with the cams? Too small/big or both the same side?

Title: Re: Not the right Cams
Post by: jayb on March 09, 2019, 05:56:56 PM

Glad I could help out, Leny.

Title: Re: Not the right Cams
Post by: Leny Mason on March 09, 2019, 06:31:16 PM

Hi, that is a big degree wheel all right, the cam's the lift was advertised @ 560 it was 530 lobe separation should be 114 was 107, it will all work out all right I still have a lot to do anyway I am just whining. Leny Mason

Title: Re: Not the right Cams
Post by: 428 GALAXIE on March 10, 2019, 01:47:38 AM

But when that is ready youl have one hell of a cool car no matter how long it took.
So thumps up and carry on the good work.