FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: HvyFt4spd on February 25, 2019, 03:21:26 PM

Title: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on February 25, 2019, 03:21:26 PM

 I bought these from Blair and I'm trying to recoup as much of my investment as possible. Asking $8k for the pile...make offer.
 I'd give top dollar in trade value for a set of unported Hirisers that have never been blown up to start over with. Looking for bare set that have never been worked on, no cracks, seats etc. Original Ford heads only please, 63K or original 64F heads perferred 70's reissue considered. *Update I found a cherry set of heads so I'm no longer in the market*

 These are 64 F heads, both sides are ported, Ferrea valves, Crower springs, dampeners and retainers, Manley cups. They have seats in the intakes and exhaust, a bowl blend and comp valve job. Blair's bushed TD rockers cut down to fit and his Bullet "baby roller" grind.

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on February 25, 2019, 03:28:53 PM

 ...

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on February 25, 2019, 03:36:08 PM

....

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on February 25, 2019, 04:24:57 PM

* A couple guys have asked about the cam and the specs are pictured below. Thanks, Dan

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on March 09, 2019, 10:44:14 AM

Offers or trades considered...

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on April 10, 2019, 03:20:41 PM

 Cam has been sold... Asking $7k for complete heads with rockers.

 Offers or trades considered, possible delivery to FERR
 

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on June 30, 2019, 02:05:24 AM

 Bottom dollar... $6,000 for heads and TD's or
 $5,000 for heads and $1600 for rockers.

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on August 17, 2019, 12:55:24 PM

Still hoping to off these, Trades welcome...
 *Glad to provide more pictures and if possible I'd prefer the buyer see them in person so there are no surprises.

 I'm looking for XE/SK Ford parts, factory tach drive distributors, odd/interesting Hiriser intakes, Moldex/Crower/ M/T stroker crank, rubber full floor mats for 62-65 Fairlane, 60's fiberglass doors for 62-64 Fairlane, 62-63-65 fiberglass decklid etc.

With exception of the crank I'm only interested in real 60's parts.

Thanks, Dan

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on October 06, 2019, 12:21:47 PM

 Maybe with all the EMC hype a fan might want these?

 Heads $5000
  TDs $1600
 Both $6000

 Trades
 Untouched Hiriser heads
 Forged billet/FE crank
 XE Hiriser intake
 Kaase B9 heads
 Boss 429 blower manifold
 3V Cleveland heads
 Oval window VW
 Magnesium wheels
 Vintage Speed equipment for almost anything.

Title: Re: Hiriser heads, Bullet "baby roller", TD's
Post by: HvyFt4spd on February 08, 2020, 01:25:25 AM

Still trying to get rid of these...trades welcome.