FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Dieselman966 on January 09, 2019, 01:44:32 PM

Title: Cruise o matic torque converter
Post by: Dieselman966 on January 09, 2019, 01:44:32 PM

Looking for some knowledge on torque converters for cruise o matic transmissions.  Searches turn up nothing other than stock converters.  Any reputable shops that could work the one over that I have?

Title: Re: Cruise o matic torque converter
Post by: e philpott on January 09, 2019, 02:51:56 PM

Call Frank Lupo's performance division that's part of Dynamic Torque Converter , those guy's are great to talk to and will freshen up any bodies converter , they can make changes or preserve whats there

Title: Re: Cruise o matic torque converter
Post by: Royce on January 09, 2019, 03:21:05 PM

Check with Broader Performance. He has a link on here I think, or the FE forum. He knows Ford trannies and will do you a good job..  I am not sure but a FMX converter might work with a Cruiso..If so there could be a higher stall version available.

Title: Re: Cruise o matic torque converter
Post by: FirstEliminator on January 10, 2019, 07:48:57 AM

The hub is different. FMX has flats on the hub like a C-4, C-6 AOD and the Cruise-O has lugs to drive the pump.  I use Precision of New Hampton Convertors in Iowa.  Dynamic is good too and I use them for certain models.  Either can customize a convertor for you.