FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: dozz302 on November 10, 2018, 01:21:08 PM
-
Hello, just wondering if anyone has the spec. sheet for the 2294 pistons standard bore. These have a dome. I think they are TRW or Sealed Power. Thanks eparocz@aol.com
-
From my 1983 TRW catalog:
L2294F piston std.
1.65 Comp. Dist.
.125 Dome Height
Compression ratio 12.69 with 69.6 cc
12.0 with 74.3 cc with .015 deck clearance and .035 gasket
If they are decent, a full set, and for sale, I'm interested
gearhead427@verizon.net
-
Thank you for the response. Well I'm putting together a motor and have 2 sets of pistons. Not sure which I will use. I will keep your response and If I do sell I will contact you first. Thanks again.
-
Do you happen to know the thickest head gaskets you can buy that are not the cometics- there very expensive. My CJ heads have 66.2 cc chambers. How much would they have been milled then? Just asking -I'll probally start another post if you don't know. Thanks
-
The Felpro 8554PT head gasket comes in at about .050.
That's the thickest non Cometic or SCE head gasket I can think of.
-
Thanks, I'll check them out.
-
Rock Auto has the best price
https://www.rockauto.com/en/parts/fel-pro,8554PT,cylinder+head+gasket+/+set,5412
Ricky.