FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: turbohunter on October 16, 2018, 02:31:32 PM

Title: WTB standard 390 block
Post by: turbohunter on October 16, 2018, 02:31:32 PM

Hi guys
Not for me but my brother is looking for a standard block for his truck project. Standard deck as well as bores.
If you’ve got one and would like to part with it I’ll hook you both up.
He lives between Iowa and Nashville so he can pick up over a large area.

Title: Re: WTB standard 390 block
Post by: Drew Pojedinec on October 16, 2018, 02:53:54 PM

C4AE std bore
D4TE std bore and crack checked.
$250 each

Title: Re: WTB standard 390 block
Post by: turbohunter on October 16, 2018, 03:10:24 PM

Ok Drew I’ll pm you.

Title: Re: WTB standard 390 block
Post by: 428kidd on October 18, 2018, 08:03:37 AM

Im in the Cookeville TN area, just out side nashville, have several that are complete. He is welcome to come look and pick one out. Thanks Lance

Title: Re: WTB standard 390 block
Post by: Drew Pojedinec on October 18, 2018, 10:28:22 AM

Marc. It won’t hurt my feelings at all if he buys that local one instead of shipping mine.

Title: Re: WTB standard 390 block
Post by: turbohunter on October 18, 2018, 04:27:59 PM

I’ll tell him about it.
You’re both very kind, thank you.
Lance by complete do you mean complete short blocks or ?
He has a rotating assembly which is why he needs a standard block.

Title: Re: WTB standard 390 block
Post by: 428kidd on October 18, 2018, 09:41:43 PM

Drew , and I sure wasn't trying to cut in on you at all .Was just offering up a possible local offer .If he would rather take Drew's as he posted first I will back out. If not ,  I have several complete engines if he needs that. I can also tear one down if a block is all that is needed. If Drew's have been cleaned and checked at that price it is a super good deal!

Title: Re: WTB standard 390 block
Post by: BigBlueIron on October 26, 2018, 10:54:52 AM

I have one if your still looking. Originally a 360 virgin with exception of a few oil mods, should clean up at .03. I have ran it so no known major defects. Located in south central IA

Title: Re: WTB standard 390 block
Post by: turbohunter on November 12, 2018, 07:58:33 AM

Ryan and Lance got it done.
Thanks for the help guys.